Fairbanks 5001 Series QuickSilver IS - Manual (Page 5)

Section 1: Introduction
50770 5 04/12 Rev. 5
The 5001 Series of bench scales and indicators have stainless steel construction. They are
designed for use in a hazardous area and/or wash-down environment. They either have a
direct power supply or can also use a battery. The scales feature the capacity to store up to
four (4) Over/Under Checkweighing Sequences in memory, each of which can be recalled at
the push of a button. Programming of these Over/Under Checkweighing can be made through
the front panel. The battery pack is stored in the battery holster located on the back of the
indicator which can be easily removed for recharging.