Fairbanks 5001 Series QuickSilver IS - Manual (Page 11)

Section 5: Operation
50770 11 04/12 Rev. 5
A. Keys
ON - When pressed, turns the indicator ON. The display will go through a
warm- up sequence and then go into the weigh mode.
OFF - When pressed, turns the indicator OFF.
UNITS - Switches the scale between the available units, pounds, kilograms,
ounces, and grams.
UP - DOWN - These are used to scroll through the various values in each of the
program options and are used to change the over/under values
in the checkweigh mode.
1, 2, 3, 4 - These are used to program and select the stored checkweigh values.
AUTO - Enters the value of the weight on the platform into memory as a tare
weight.
GROSS - Toggles the display between GROSS weight and NET weight.
ZERO - When pressed, sets the indicator to zero.
1 2 3 4
UNITS