FIREPOWER Firefinder XLS User Manual
Page 9
s
Industry, Inc.
Building Technologies Division
ID-MP Inner Door Mounting Plate
The Inner Door Mounting Plate (Model ID-MP) is
mounted on the inner door of any given model CAB
enclosure. Model ID-MP plates are used to mount
switch-control modules (Model SCM-8); LED control
modules (Model LCM-8), or fan-control modules (Model
FCM-6).
Four (4) mounting plates are included in each Model ID-
MP. Each mounting plate has four (4) spaces for control
modules, and can hold either four (4) Model SCM-8
modules (one [1] control module space for each
module); four (4) LCM-8 (one [1]control module space
for each module), or two (2) Model FCM-6 modules (two
[2] module spaces for each module).
Combinations are also allowed. Blank spaces in Model ID-
MP can be covered using the blank-control-module
plate (Model BCM). Up to four (4) Model ID-MP
modules can be mounted in a single row on the inner
door.
ID-SP Inner Door Blank Single Plate
ID-SP Inner Door, Blank Single Plate
The Inner Door, Blank Single Plate (Model ID-SP) is used to
cover any single-module blank spaces on the inner door
not used to mount Model PMI or Model ID-MP. Up to
four (4) Model ID-SP modules can be mounted in a
single row on the inner door. Two (2) blank plates are
included in each Model ID-SP.
ID-FP Inner Door Full-Blank Plate
Model ID-FP is a blank plate that covers the full opening of
the row on an inner door, and is used for applications
requiring full, dead-front protection. A single, full blank
plate is included in Model ID-FP.
BCM Blank Control Module Plate
BCM Blank Control-Module Plate
Model BCM plates can be mounted on a single ID-MP.
Four (4) blank module plates are included in each
Model BCM.
OD-LP Outer Door Lens Plate
OD-LP Outer Door Lens Plate
The Model OD-LP is a clear plastic lens plate mounted
on the outer door of a system cabinet. It is used to allow
operators to see the system interface and controls
mounted on the inner door, but restricts access to
unauthorized users. It covers an entire row on the outer
door. A single lens plate is included with each OD-LP.
OD-BP Outer Door Blank Plate
OD-BP Outer Door Blank Plate
The Model OD-BP is used to cover an entire row on the
outer door of a system cabinet. It is used when there is
no PMI or control modules mounted on the adjacent row of
the inner door. A single, blank plate is included in each OD-
BP.
OD-GP Outer Door Grill Plate
OD-GP Outer Door Grill Plate
The Model OD-GP also covers an entire row on the outer
door of a system cabinet, but has four rows of ventilation
louvers on it. The OD-GP is mounted in front of system
bulk amplifiers, card amplifiers, or other modules that
generate heat. Using the OD-GP will permit airflow across
these modules to aid in heat dissipation. A single grill
plate is included with each OG-GP.