FIREPOWER Vista 32-128FB - Manual (Page 38)

– 38 –
Panic Keys
(For Manually Activating Silent And/Or Audible Alarms)
Using Panic Keys
Your system may have been programmed to use special key combinations to
manually activate panic functions. The functions that might be programmed
are Silent Emergency, Audible Emergency, Personal Emergency, and Fire.
See your installer for the function(s) that may have been programmed for
your system.
Active Panic Functions
(Your installer should note which
function(s) is active in your
system.)
Keys Zone Function
1 and * 995
3 and # 996
* and # 999
A 995
B 999
C 996
To use a paired key panic function,
simply press both keys of the assigned
pair at the same time.
If your keypad(s) have lettered keys for
panic functions, press the designated
key and hold down for at least 2 seconds
to activate the panic function.
A silent emergency sends a silent alarm signal to the central station, but
there will be no audible alarms or visual displays.
An audible emergency sends an emergency message to the central station
(if connected) and will sound a loud, steady alarm at your keypad and at any
external sounders that may be connected (ALARM plus a zone number
would also be displayed).
A personal emergency alarm sends an emergency message to the central
station (if connected) and will sound at Keypads, but not at external
Notification Appliance Circuits. (ALARM plus a zone number would also be
displayed.)
A fire alarm sends a fire alarm message to the central station and will
uniquely sound external Notification Appliance Circuits. (FIRE plus a zone
number would also be displayed).