Teledyne Max-5 - Combustion efficiency analyzer User Manual
Page 20
To STORE current readings
(Key 3)
1.
Activate Special Functions.
2.
Press key number 3; the display will read “5 0 0”.
CAUTION: If you press ENTER while the display reads “0 0 0”, you will ERASE all
previous readings. To abort the erasing feature, simply press the LOGO key instead of
ENTER.
3.
Set the display to an ID number (1 to 999 set-table) using the arrow keys.
4.
Press ENTER to store the reading and the I.D. number (or Teledyne key to exit). Normal
operation will resume.
5.
The readings of up to twenty burners can be stored by the above method of selecting an
I.D. number for each. Multiple readings under one I.D. number are OK (up to 20
readings
total). All 20 readings and I.D. numbers can be printed under function 5.
To DISPLAY readings that have been stored
(Key 4)
1.
Activate Special Functions.
2.
Press key #4. The instrument will display the first I.D. number. Press the LOGO key to
escape; and other key to proceed. The instrument will display the first set of readings.
Press any key except the LOGO key to display the second set of readings and repeat for
all readings. Press the LOGO, PUMP ON/OFF, and *keys to return to normal operation.
To PRINT stored readings
(Key 5) (Optional - See Appendix)
1.
Plug the printer cable into the MAX 5 serial port and the printer. Turn on the printer.
2.
Activate Special Functions and press key #5. The printer will print the I.D. number and
the six numerical values of each of the stored readings in chronological order.
To TEST the keyboard/LCD/RESET
(Key 6)
1.
Activate Special Functions.
2.
Press key 6 to call for a keyboard test.