Alamo FC-0002 - Manual (Page 66)

OPERATION
SAMURAI 12/08 Operation Section 3-18
©2008 Alamo Group Inc.
OPERA
T
ION
DITCHER HEAD INSPECTION
• Inspect blades and bolts on ditcher head
assembly for looseness and excessive wear.
Make sure the unit is securely blocked up
before doing maintenance. Replace damaged
and worn blades as complete sets to maintain
unit balance.
• Ensure hydraulic lines are properly connected
to the hydraulic motor. Check for hydraulic
leaks along hoses and fittings. DO NOT use
your hands to check for oil leaks. Use a piece
of heavy paper or cardboard to check for
hydraulic oil leaks.
• Ensure rubber deflectors are in position and not
damaged. Replace worn, broken, and missing
sections immediately.
• Ensure hydraulic cylinder is installed and retained correctly. Ensure the proper size pins are used to retain
the cylinder in place and are secured with pins. OPS-B- 0029
Do not put hands or feet under mower decks. Blade Contact can result
in serious injury or even death. Stay away until all motion has
stopped and the decks are securely blocked up.
(SFL-2)
All Safety Shields, Guards and other safety devices including (but not limited to) -
Deflectors, Steel Guards and Gearbox Shields must be used and maintained in good
working condition. All safety devices should be inspected carefully at least daily for missing
or broken components. Missing, broken, or worn items must be replaced at once to reduce
the possibility of injury or death from thrown objects, entanglement, or blade contact.
(SSM-07)