Grass flail head, Grass flail head -16, Maintenance – Alamo FC-0002 User Manual
Page 112
MAINTENANCE
SAMURAI 12/08
Maintenance Section 4-16
©2008 Alamo Group Inc.
MAINTENANCE
Grass Flail Head
Tensioning Drive Belts
The rotor shaft is driven from the gear motor via “V” belts which are adjustable for tension. After stopping the
tractor engine, remove the drive guards to tighten the belts. Check the tension by applying a force of 6.17 -
7.72 lbs at right angles to the belt in the centre of the two pulleys. If the deflection is great than 1/4” then
release the motor mounting plate screws and adjuster locknut and screw the adjuster to tighten the belts until
the deflection is 1/4”. Then, tighten the locknut, recheck the belt tension, and replace the belt cover.
IMPORTANT: Do not overtighten belt as this may cause premature failure of the rotor shaft and motor
bearings.
- 02986941P (99 pages)
- Machete T 7740 (90 pages)
- Switchblade Sickle Bar 6 (112 pages)
- FALCON 15/10 (156 pages)
- AXTREME2 02988075P (174 pages)
- Brahma 02968822P (64 pages)
- JD-5205 (104 pages)
- RX72 (52 pages)
- MACHETE 02968915C (174 pages)
- none (150 pages)
- 00756179P (70 pages)
- Lawn Mower (70 pages)
- Maverick Boom Arm Mower (174 pages)
- 803213C (140 pages)
- A-Boom (226 pages)
- 02979718C (110 pages)
- 272 (136 pages)
- A84B (148 pages)
- RHINO 2409 (106 pages)
- SHD96 (140 pages)
- 7191852C (110 pages)
- SAMURAI 02986950P (104 pages)
- 800 (58 pages)
- A60 (138 pages)
- ST10 (74 pages)
- Exten-A-Kut II (142 pages)
- RHINO 7214 MSL (44 pages)
- RHINO 95C (56 pages)
- A72B (138 pages)
- 803350C (168 pages)
- Interstater 803213C (186 pages)
- 6212 (100 pages)
- 4211 MSL (104 pages)
- Eagle 14 (186 pages)
- RHINO FX21 (156 pages)
- TS-135A (72 pages)
- TS-100A (154 pages)
- 02968915P (170 pages)
- Axtreme 02983326P (116 pages)
- RX96 (172 pages)
- 00761808C (170 pages)
- Axtreme 02984405 (106 pages)
- Swingtrim (126 pages)
- Axtreme FC-P-0002 (114 pages)