beautypg.com

Tank fill, Blades, Blades -4 – Alamo FC-0002 User Manual

Page 100: Maintenance

background image

MAINTENANCE

SAMURAI 12/08

Maintenance Section 4-4

©2008 Alamo Group Inc.

MAINTENANCE

TANK FILL

Check the sight gauge and add hydraulic fluid

(Refer to list of recommended fluids) to bring the

level up between 1/2 to 3/4 on the gauge. See

Figure MntP-0017.

BLADES

Check the Blades for cracks and wear and Blade Bolts for tightness, daily. Blades should be replaced when

they are worn excessively, bent, deformed, or out of balance.

Blades should always be replaced in pairs. Blades of different weights can cause serious

imbalance and damage to the machine and personnel. When replacing blades, take care to

replace the blade bolts, nuts, and washers.