Alamo FC-0002 - Manual (Page 47)

INTRODUCTION
SAMURAI 12/08 Introduction Section 2-3
©2008 Alamo Group Inc.
INTRODUCTION
Your Boom Mower is designed for heavy-duty cutting in limited access areas such as highway, park, and rural
roadsides, overhead growth, ditches, levees, and other such grass and limb control uses in generally hard-to-
reach areas. Your Boom can be equipped with a variety of cutting heads designed for specific cutting needs.
The Rotary Head: Rotary unit, 60" & 50” wide cut, up to 5" vegetation, front safety gate.
The Flail Axe Head: Fail unit, 48" wide cut, up to 5" vegetation.
The Buzzbar; Flail unit, 48”, 63” and 90” cutting width, up to 6” diamete
Grass Flail; Flail unit , 60” cutting width, up to 2” vegetatioin
Timbercat: Limb cutter, 5’ & 7’ cutting lengths, up to 4” diameter limbs
Ditcher; Ditch unit, 20” cutting width
DIRECTION
Throughout this Manual front and rear, left and right are determined by the normal direction of travel, the same
as driving an automobile.Front and rear, and left and right are determined by the normal direction of travel (the
same as on your automobile).