Fulton Caliber (CAL) Condensing Hydronic Boiler - Manual (Page 30)

© The Fulton Companies 2014
INSTALLATION
CAL-IOM-2014-0129
SECTION 2
2-24
Electrical Connections
Adhere to the following when installing electrical
connections:
1. Install wiring and ground boiler in accordance with
authority having jurisdiction, or in absence of such
requirements utilize National Electrical Code, ANSI/
NFPA 70.
2. This boiler requires an independent 120V 60Hz single
phase connection. Connect power to the terminal
strip as supplied on the inside cover of the panel box.
3. Refer to Figure 13 for a sample electrical diagram.
Please note, Figure 13 is for general reference purposes
only and is not to be used for construction purposes.
NOTE:

Connect a ground wire to green colored ground lug in
electrical control box.