Bosch MUZ8FA1 Accessoires Hachoir à viande avec adaptateur pour MUM8 - Manual (Page 5)

5
en
Optional accessories
(Available from specialist outlets)
Warning!
Always assemble the accessory parts without
blades and discs. For all information on
"Safety", "Cleaning and servicing" and "After
using the appliance", see information for the
mincer or mincer attachment.
Adapter
MUZ8AD1 Fig. 3
for securing the mincer attachment and pasta
attachments.
Perforated disc sets
MUZ8LS2/LS3/LS4
Perforated disc sets
MUZ8NV1/NV2/NV3
The adapter MUZ8AD1 is required for attachĆ
ment.
Fruit press attachment Fig. 4
For pressing the juice out of e.g. berries,
tomatoes, apples, pears, rosehips (cook
rosehips for 1 hour before pressing).
The extracted fruit pulp is especially suitable
for making jam.
S Prepare the fruit press attachment the same
as the mincer attachment. Note the required
individual parts and assembly sequence of
the fruit press attachment.
S First unscrew the fastening screw until the
pulp can flow out still moist.
S Then adjust the fastening screw until the
pulp flows out with the desired amount of
moisture.
S Place fruit which is to be processed in the
filling tray.
Use the pusher to force down the fruit.
S Select setting 4 with the rotary switch.
Biscuit attachment
MUZ8SV1 Fig. 5
For shaping biscuit dough or short pastry.
S Prepare the biscuit attachment the same as
the mincer attachment. Note the required
individual parts and assembly sequence of
the biscuit attachment.
S Place dough which is to be processed in the
filling tray. Use the pusher to force down the
dough.
S Select setting 1, 2 or 3 with the rotary
switch.
S Catch the shaped dough coming out of the
attachment on a kitchen board. If the dough
comes out too quickly, briefly switch off the
food processor.
Grater attachment
MUZ8RV1 Fig. 6
for grating almonds, nuts, refrigerated
chocolate and dried bread or bread rolls.
d Warning!
Process only dry nuts and almonds in small
quantities!
S Prepare the grater attachment the same as
the mincer attachment. Note the required
individual parts and assembly sequence of
the grater attachment.
S Place ingredients which are to be processed
in the filling tray.
Use the pusher to force down the ingreĆ
dients.
S Select setting 1, 2 or 3 with the rotary
switch.
Sausage filler set
MUZ8WS2 Fig. 7
for filling all types of sausage, for shaping
croquettes.
S Prepare the sausage filler set the same as
the mincer attachment.
S Note the required individual parts and
assembly sequence of the sausage filler set.
S Place food which is to be processed in the
filling tray.
S Use the pusher to force down the
ingredients.
S Select setting 2, 3 or 4 with the rotary
switch.
Subject to alterations.