Bosch KFL24A51FF - Manual (Page 10)

10
Before installing the
appliance
Installation location
Before reading the instructions, please
detach the illustrated center pages.
You can now read the text and refer to the
diagrams.
The installation location should be a dry,
well ventilated room. The appliance
should not be exposed to direct sunlight
and should not be near a heat source
(e.g. a radiator, cooker). If required,
use an insulating plate.
!
Warning!
The appliance contains the
environmentally friendly but flammable
refrigerant R600a. Ensure that the
refrigeration circuit is NOT damaged
during transportation and installation.
Leaking refrigerant may ignite or cause
eye injuries.
The more refrigerant in an appliance,
the larger the room must be in which
the appliance is situated. If a leak
occurs in a room which is too small, a
flammable gasĆair mixture may form.
The room must be at least 1 m 3 per 8
g of refrigerant. The amount of
refrigerant in your appliance is
indicated on the rating plate inside the
appliance.
If refrigerant is leaking out:
S Avoid naked flames and ignition sources
near the installation location.
S Unplug the appliance and thoroughly
ventilate the room for several minutes.
Changing over door
hinges
If not required, see Installing the
appliance".
Appliance door
Fig. 1
Unscrew the hinges (1), (2) and remove
the cover (3). Diagonally reposition the
parts.
Freezer compartment door
(only 4Ćstar refrigerators)
Fig. 2
Installation in numerical sequence.
en