Bosch DWA091450 - inox Hotte décorative murale 90 cm - Manual (Page 13)

13
5. Screw on the bracket for fixing the flue
ducts.
6. In order to help fix the hood onto the wall,
screw in 2 screws until it protrudes by
approx. 5 mm.
7. Hook the extractor hood over the screws
in the wall, align the extractor hood
properly.
8. Mark 2 lower fixing points.
Remove the hood and drill 2 holes (dia. 8
mm) on the marked points. Fit 2 wall
plugs, Hang again the hood and fix the
hood permanently with 2 screws.
9. Connect up the air outlet pipe.
10. Connect the hood to the electricity
supply.
Installation
11. Stainless steel model:
Remove the protective film from the two
flue ducts.
Avoid damage to the sensitive
surface.
12. Screw the upper flue duct to the sides of
the fixing bracket with 2 short screws.
13. Position the lower flue duct on the
extractor hood, align the flue duct.
To prevent scratching the upper duct
when pushing on the lower duct, cover
the edge of the lower duct with the
installation template or other protective
material.
14. Re-insert the grease filter (see operating
instructions).