PROLiNK PWH2004 User Manual User Manual

Page 39

PROLiNK

PWH2004 User Manual

www.prolink2u.com

Revision 1.0 (Aug’09)

4.7.5. IP Filtering

IP Filtering

Select Enable or Disable from the pull-down list. Default setting is Disable.

Dest IP Address

Enter the local server’s IP address.

Source IP Address Enter the source IP address.
Dest IP Address

Here shows the Dest IP address that added in the filter list.

Source IP Address

Here shows the Source IP address that added in the filter list.

Number

Here shows the number that IP address listed. The maximum rule count is 32.

4.7.6. Virtual Server

Virtual Server Settings

Select Enable or Disable from the pull-down menu.

IP Address

Enter the local server’s IP address.

Port Range

For TCP and UDP services enter the beginning of the range of port numbers
used by the service. If the service uses a single port number, enter it in both
the start and finish fields.

Protocol

Select the protocol (TCP, UDP or TCP&UDP) used to the remote system or
service.

Comment

Please key in a description for the IP address.

No. IP address Port
range Protocol

Here shows the IP address, Port range, Protocol information that added in
the list. The maximum rule count is 32.