PROLiNK PWH2004 User Manual - Manual (Page 22)

PROLiNK ® PWH2004 User Manual www.prolink2u.com
Revision 1.0 (Aug’09) 20
3G (DIAL)
User have to insert USB card therefore, the 3G(DIAL) function can be used.
Provider:
Select the ISP that provides the USB card from the pull-
down list.
Service Name: Enter the service name that ISP provided.
Dial Number: Enter the dial number that ISP provided.
Pin code: Enter the SIM card Pin code that ISP provided.
Authentication: Check the box to enable to authentication function.
• User Name: Enter the user name that provide by your ISP.
• Password: Enter the password that provide by your ISP.
• Auth Mode: Select the authentication mode form the pull-
down list.
Operation Mode: Select Keep Alive, On Demand or Manual form the pull-
down list.
• Keep Alive Mode: Enter the Redial Period seconds in the box.
• On demand Mode: Enter the Idle Time minutes in the box.
• MTU Value: MTU (Maximum Transmission Unit, namely the
maximum packet size, the default value is 1452) for your
application. Reducing the packet size can help connecting to
certain web sites or speeding up packet transfer rate. If the
incorrect selection is entered, you may not be able to open
certain web sites.