PROLiNK PWH2004 User Manual - Manual (Page 17)

PROLiNK ® PWH2004 User Manual www.prolink2u.com
Revision 1.0 (Aug’09) 15
4.4.4. Network Mode
This step can set up wireless network mode, network name and channel.
Network Mode
Select 11b/g mixed mode, 11b only, 11g only, or 11b/g/n mixed mode from the
pull-down menu (Default is 11b/g/n mixed mode).
Network Name
(SSID) A SSID is referred to a network name because essentially it is a name (case-
sensitive) that identifies a wireless network.
Frequency (Channel) Select 1~11 or Auto Select from the pull-down menu.
4.4.5. Security
Here can set up the wireless security of the Wireless Router.
Select desired security type from the pull-down menu Disable, Open System, Shared Key, AUTO
(Open/Shared), WPA-PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK. The default setting is Disable. It is strongly
recommended to set up security mode (Open, Shared, AUTO (Open/Shared), WPA-PSK, WPA2-PSK, WPA-
PSK/WPA2-PSK) to prevent any unauthorized accessing.
Open System
Shared Key
AUTO (Open/Shared)
Default Key:
Select the default key Key1~4.
WEP Key 1~4: Enter the key in the selected key field. Only valid when
using WEP encryption algorithm. The key must match with
the AP’s key. There are several formats to enter the keys.
• Hexadecimal (WEP 64 bits): 10 Hex characters (0~9, a~f).
• Hexadecimal (WEP 128 bits): 26 Hex characters (0~9, a~f).
• ASCII (WEP 64 bits): 5 ASCII characters (case-sensitive).
• ASCII (WEP 128 bits): 13 ASCII characters (case-sensitive).