PROLiNK PWH2004 User Manual - Manual (Page 30)

PROLiNK ® PWH2004 User Manual www.prolink2u.com
Revision 1.0 (Aug’09) 28
WPA
WAP2
WPA1 WPA2
WPA Algorithms:
Select the type of algorithm TKIP or AES for WPA, and TKIP,
AES or TKIP/AES for WPA2, WPA/WPA2.
Key Renewal Interval: Enter the renewal security time (seconds) in the column.
Default is 3600 seconds. Set 0 to disable re-key.
RADIUS Server: RADIUS is an authentication, authorization and accounting
client-server protocol. The client is a Network Access Server
that desires to authenticate its links. The server is a server
that has access to a user database with authentication
information.
IP Address: Enter the RADIUS Server’s IP Address provided by your ISP.
Port: Enter the RADIUS Server’s port number provided by your ISP.
(The default is 1812.)
Shared Secret: Enter the password that the Wireless Router shares with the
RADIUS Server.
Session Timeout: Session timeout interval is for 802.1x re-authentication setting.
Set to zero to disable 802.1x re-authentication service for each
session. Session timeout interval unit is second and must be
larger than 60.
Idle Timeout: Enter the idle timeout in the column.
•
PMK Cache Period: Only valid in WPA2 security. Set WPA2 PMKID cache timeout period, after
time out, the cached key will be deleted. PMK Cache Period unit is minute.
• Pre-Authentication: Only valid in WPA2 security. The most important features beyond WPA to
become standardized through 802.11i/WPA2 are: pre-authentication, which enables secure
fast roaming without noticeable signal latency.