PROLiNK PPL1202N Quick Installation Guide - Manual (Page 12)

PROLiNK PPL1202N User Manual www.prolink2u.com
Version 1.00 (Jul’10) 12 English
Advanced Wireless:
Functions Descriptions/Details
BG Protection Mode Some 802.11g wireless adapters support 802.11g protections, which allows the adapter search for
802.11b/g singles only. Select “Auto” to turns it on or off automatically, select “On” to support
protection or select “Off” to disable this function.
Beacon Interval Beacons are packets sent by an access point to synchronize a wireless network. Specify a beacon
interval value. Default (100ms) is recommended.
Data Beacon Rate(DTIM) Enter a value between 1 and 255 (default 1) for the Delivery Traffic Indication Message (DTIM). A
DTIM is a countdown informing clients of the next window for listening to broadcast and multicast
messages.
Fragment Threshold This value should remain at its default setting of 2346. If you experience a high packet error rate,
you may slightly increase your fragmentation threshold within the value range of 0 to 2346. Setting
the fragmentation threshold too low may result in poor performance.
RTS Threshold Request To Send threshold. This value should remain at its default setting of 2347. If you encounter
inconsistent data flow, only minor modifications to the value range between 1 and 2347 are
recommended.
Tx Power Transmit power. You can set the output power of wireless radio. This value should remain at its
default setting of 100. If you
Short Preamble The length of CRC blocks in the frames during the wireless communication.
3.4.2 Wireless Advance Settings