Ricoh Aficio SP 4110N - Manual (Page 30)

4. Slowly insert the hard disk drive while aligning it with the top and bottom rails in the printer
until it stops.
AUB216S
5. Fasten the two screws to fix the hard disk drive.
AUB217S
• Use a coin or similar object if the screws do not turn easily.
• After finishing installation, you can check whether the hard disk drive is properly installed: Print the
configuration page from the [List/Test Print] menu. If it is installed properly, you will see "Hard Disk
Drive" for "Device Connection" on the configuration page.
• If the Hard disk drive is not installed properly, repeat the procedure from the start. If you cannot install
it properly even after reinstallation, contact your sales or service representative.
• "Printing the Test Page", Quick Installation Guide.
2. Installing Options
28
2