PASCO ME-8598 Venturi Apparatus - Manual (Page 3)

Venturi Apparatus
ME-8598
®
3
1
2
3 4 5
6
Included Equipment Part Number Air Method: Recommended Equipment
1
Part Number
1. Venturi Apparatus base and top plate ME-8598 Spirometer Sensor
2
PS-2152
2. T-knob Screws (qty. 8) 617-024 One of the following:
3. Spirometer Tubing, 2.5 cm ID, 15 cm long 640-053 Shop Vacuum (or similar air supply) 3
4. Rubber Stoppers, 1-hole (qty. 2) 648-09597 Balloon and balloon pump
5. Restriction Clamps (qty. 2) 640-052 Water Method: Recommended Equipment 4
6. Fluid Tubing, 6 mm ID, 6 m long 640-012 Water Reservoir (or similar container) ME-8594
Required Equipment Container to catch water
Quad Pressure Sensor PS-2164 Table Clamp ME-9472
PASPORT Interface 5 See PASCO
catalog or
www.pasco.com 120 cm rod ME-8741
2 Three-finger clamps SE-9445
One of the following:
Motion Sensor 2 PS-2103
Rotary Motion Sensor 2 PS-2120
Force Sensor 2 PS-2104
Stopwatch SE-8702B
1 See page 8 for more information.
2 The use of this sensor and the Quad Pressure Sensor simultaneously requires a multi-port PASPORT Interface (such as Xplorer
GLX or PowerLink) or two single-port interfaces.
3 See pages 8–10 for more information.
4
See pages 10–13 for more information.
5 PASPORT interfaces include Xplorer GLX (PS-2002), PowerLink (PS-2001), AirLink (PS-2005), Xplorer (PS-2000), and USB Link
(PS-2100)