PASCO ME-6841 Curved PAStrack - Manual (Page 3)

®
C u r v e d P A S tr a c k M E - 6 8 4 1
3
Larger Height Change
Figure 7: Larger height change using both curved sections and
three straight sections
For a larger height change, add one or more straight sections
between the curved sections. In the configuration shown in Fig-
ure 7, the height change is about 10 cm. The flexibility of the
track allows the height to be varied slightly.
Ramp
Figure 8: Ramp using the concave-up curved section and two
straight sections
In this configuration, the angle of the inclined section is about 8°.
The flexibility of the track allows the angle to be varied slightly.
Release a cart from various points on the inclined section and use
photogates or a motion sensor to measure the velocity on the
level section.
Oscillator
Figure 9: Oscillator using the concave-up curved section and two
straight sections
The oscillator uses the same combination of sections as the ramp,
but both straight sections are inclined. A cart released from one
end will oscillate several times before coming to rest at the cen-
ter.
Technical Support
For assistance with any PASCO product, contact PASCO at:
For more information about the Curved PAStrack and the latest
revision of this Instruction Sheet, visit:
www.pasco.com/go?ME-6841
Limited Warranty For a description of the product warranty, see the
PASCO catalog. Copyright The PASCO scientific 012-10515A Curved
PAStrack Instruction Sheet is copyrighted with all rights reserved. Permis-
sion is granted to non-profit educational institutions for reproduction of any
part of this manual, providing the reproductions are used only in their labo-
ratories and classrooms, and are not sold for profit. Reproduction under
any other circumstances, without the written consent of PASCO scientific,
is prohibited.
Trademarks PASCO and PASCO scientific are trade-
marks or registered trademarks of PASCO scientific, in the United States
and/or in other countries. All other brands, products, or service names are
or may be trademarks or service marks of, and are used to identify, prod-
ucts or services of, their respective owners. For more information visit
www.pasco.com/legal.
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone: 916-786-3800 (worldwide)
800-772-8700 (U.S.)
Fax: (916) 786-7565
Web: www.pasco.com
Email: [email protected]