PASCO ME-9865 Launcher Sights - Manual (Page 2)

Launcher Replacement Sights (5) 012-08712A
2
Replacing the Sight in the Piston
1. Carefully slide the screwdriver under the small tab
on the top surface of the retaining ring.
2. Pry the tab away from its seated groove of the cyl-
inder and pull upward.
3. Slowly rotate the ring out of its groove until it is
removed from the cylinder.
4. Pull the large black washer out of its groove to en-
able access to the piston.
5. Pull up on the trigger and remove the piston.