PASCO SE-8685 Pulley Demonstration System - Manual (Page 3)

®
Model No. SE-8685 Pulley Demonstration System
3
Pulley Demonstration System
Model No. SE-8685
Included Equipment
1. Base, 20 cm x 81 cm (1) 11. Slotted mass, 500 grams (1)
2. Aluminum rods, 81 cm (3) 12. Slotted mass, 200 grams (4)
3. Clamps, 90-degree angle (2) 13. Slotted mass, 100 grams (4)
4. Hook collars (8) 14. Slotted mass, 50 grams (2)
5. Single pulley (8) 15. Slotted mass, 20 grams (2)
6. Triple-tandem pulley (2) 16. Slotted mass, 10 grams (2)
7. Quadruple parallel pulley (2) 17. Slotted mass hanger, 50 grams (5)
8. Four-step differential pulley with head(1) 18. Slotted mass hanger, 20 grams (1)
9. Tightening rod (1) 19. Slotted mass hanger, 10 grams (1)
10. Nylon cord spool, 100 yards (1)
Additional Equipment Required Model Number
Metric Spring Scale, 20 N SE-8718
Force Sensor PS-2104 * or CI-6746 **
Rotary Motion Sensor
PS-2120
*
or CI-6538
**
Any PASCO interface ( ScienceWorkshop ® or PASPORT™ interface) Various
(See PASCO catalog)
A computer NA
1
3
2
4
5
6
7
8
9
10
11
12
13
14
15
16
17 18
19
* PASCO’s PASPORT sensors (with PS- prefix) require a PASPORT interface for operation.
** PASCO’s ScienceWorkshop sensors (with CI- prefix) require a ScienceWorkshop interface for operation.