PASCO PS-2110 Carbon Dioxide Gas Sensor - Manual

I n s t r u c t i o n S h e e t
0 1 2 - 0 7 7 5 7 D
Carbon Dioxide Gas Sensor
PS-2110
.
*See the PASCO catalog or the PASCO web site at www.pasco.com
for more information.
Introduction
The PS-2110 Carbon Dioxide Gas Sensor measures carbon
dioxide gas concentration in parts per million in gases such
as air. The sensor is designed only for educational purposes
and is not intended for environmental compliance studies.
The sensor is designed to work with a PASPORT-compatible
interface (such as the UI-5100 850 Universal Interface) and
PASCO data acquisition software (such as PASCO Cap-
stone) to measure carbon dioxide gas concentration.
The sensor includes a sensor extension cable, a 250 mL clear
plastic sampling bottle, and a stopper that fits over the sen-
sor’s probe.
Setup the Carbon Dioxide Gas Sensor
• Plug the Carbon Dioxide Gas Sensor into one of the
PASPORT input ports of a PASCO interface.
Sampling
Bottle
Sensor Extension
Cable
Threaded
Hole
Rubber
Stopper
Calibration
Button
Probe
Included Items
Sampling Bottle, Clear, 250 mL
Sensor Extension Cable
Rubber Stopper
Required Items*
PASCO Interface
PASCO Data Acquisition Software
Sensor
PASPORT
Input Port
Interface