Pach and Company AeGIS 4000P Manual User Manual

Page 23

SELECT

AUTOMATIC

CALL

FORWARDING

FUNCTION

NUMBER

SET AUTOMATIC

CALL

FORWARDING

TIME OR

HANG-UP TIME

THE SYSTEM

WILL HANG-UP

ACCORDING TO

THE TIME

SELECTED ON

FUNCTION

CODE 89 IF THE

TENANT DOES

NOT PICK UP

THE CALL

Step 3

Enter 87 then #, you will

hear “One Short Beep”.

Step 4

• Press 1 then # to enable and you will
hear “One Short Beep” or
• 0 then # to disable, and you will hear

“One Short Beep”.

Step 5

Enter another Function Code

to program another parameter other-
wise press

∗ to exit and you will hear

“Three Short Beeps”.

Step 1

Entering The Programming

Mode: Press 0 and # simultaneously
then release. If you are in the pro-
gramming mode, proceed to step 2.

Step 2

Enter the 4-digit Master

Code (factory default is 0000) and you
will hear “One Short Beep”. If you
entered an invalid master code you will
hear “One Long Beep”, repeat
step 1. Should your master code
become lost or forgotten see Reset
Master Code.

Step 3

Enter 88 then #, you will

hear “One Short Beep”.

Step 4

Enter Index Number (71-72)

then #, you will hear “One Short
Beep”.

Step 5

Enter another Function Code

to program another parameter
otherwise press

∗ to exit and you will

hear “Three Short Beeps”.

Step 1

Entering The Programming

Mode: Press 0 and # simultaneously
then release. If you are in the pro-
gramming mode, proceed to step 2.

Step 2

Enter the 4-digit Master

Step 3

Enter 89 then #, you will

hear “One Short Beep”.

Step 5

• Press 1 (to enable) then press #, you

will hear “One Short Beep” or

• Press 0 (to disable) then press #,

you will hear “One Short Beep”.

Step 6

Enter another function code

to program a different parameter or
exit the program by pressing

∗ ∗ and

you will hear “Three
Short Beeps”.

Step 1

Pick up the phone and wait

for a dial tone.

Step 2

Press # # and you will hear

“One Short Beep”.

Step 3

Press # and you will hear

“One Short Beep”.

Step 4

Press 88 then #, you will

hear “One Short Beep”.

Step 5

Press 71 or 72 then press #,

you will hear “One Short Beep” .

Step 6

Enter another function code

to program a different parameter or
exit the program by pressing

∗ ∗ and

you will hear “Three Short Beeps”.

Step 1

Pick up the phone and wait

for a dial tone.

Step 2

Press # # and you will hear

“One Short Beep”.

Step 3

Press # and you will hear

“One Short Beep”.

Step 4

Press 89 then #, you will

hear “One Short Beep”.

Step 5

Press 15-90 (15 seconds-90

seconds) then press #, you will hear
“One Short Beep”.

Step 3

Press # to enter into the

programming mode and you will hear
“One Short Beep” or

∗∗ to hang-up

the call.

Step 4

Press 87#, you will hear

“One Short Beep” , then
• Press 1 (to enable) then press #,

you will hear “One Short Beep” or

• Press 0 (to disable) then press #,

you will hear “One Short Beep”.

Step 5

Enter another function code

to program a different parameter or
exit the program by pressing

∗ ∗ and

you will hear “Three Short Beeps”.

Step 1

Call to the AeGIS 4000P

system (you must know the system’s
phone number), you will hear: “One
Short Beep”, the gate is locked.“Two
Short Beeps”, the gate is unlocked.

Step 2

Press # then enter a valid

master code and you will hear:
• “One Short Beep”, the master

code is accepted then press #
and you will hear “One Short
Beep”.

• “One Long Beep”, the master

code is rejected and the
connection will be disconnected.

Step 3

Press # to enter into the pro-

gramming mode and you will hear
“One Short Beep” or

∗∗ to hang-up

the call.

Step 4

Press 88 then #, you will

hear “One Short Beep”.

Step 5

Press 71 or 72 then press #,

you will hear “One Short Beep”.

Step 6

Enter another function code

to program a different parameter or
exit the program by pressing

∗ ∗ and

you will hear “Three Short Beeps”.

Step 1

Call to the AeGIS 4000P

system (you must know the system’s
phone number), you will hear: “One
Short Beep”, the gate is locked. “Two
Short Beeps”, the gate is unlocked.

Step 2

Press # then enter a valid

master code and you will hear:
• “One Short Beep”, the master code

is accepted then press # and you will
hear “One Short Beep”.

• “One Long Beep”, the master code

is rejected and the connection will be
disconnected.

Function

Local Programming

Premise Phone

Remote Phone

Pach and Company

Page 15

AeGIS 4000P

Chapter 3. Programming