Nova-Tech pH 110 - Manual (Page 6)

Instruction Manual CyberScan pH 11 / 110
2
2 DISPLAY & KEYPAD FUNCTIONS
2.1 Display
The LCD has a primary and secondary display.
x
The primary display shows the measured pH or mV values.
x
The secondary display shows the measured temperature.
The display also shows error messages, keypad functions and program functions.
MEM
pH %
pH
R.mV SETUP MEAS CAL MEM
Primary Display
Secondary Display
ERR
ATC
°C °F
READY
HOLD
ON
OFF
1.8.8.8
1.8.8.8
1 2 3 4
5
6
7
8
9
10 12 11 14 13
15
16
17
18
-
-
Figure 1: Active LCD screen
1. SETUP - Setup mode
indicator 7. pH - pH indicator
13. - Low battery indicator
2. MEAS - Measurement mode
indicator 8. °C°F - Temperature
indicator
14. - Electrode indicator
3. CAL - Calibration indicator 9. pH - pH buffer selection
indicator
15. - Calibration buffer
indicator
4. MEM - Memory recall mode
indicator 10. ATC - Automatic
Temperature Compensation
indicator 16. ON – READY/Auto HOLD set
up enable indicator.
OFF – READY set up disable
indicator
5. R.mv - Relative millivolt (For
pH 110 only)& millivolt
indicator (For both model) 11. MEM - Memory location
indicator 17. HOLD – Hold indicator
6. % - Percentage indicator 12 ERR - Error indicator 18. READY – Ready indicator
http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products Tel: (281) 359-8538 Toll Free:(866) 433-6682