P 2.0, P 2.1, P 2.3 p 2.4 – Nova-Tech pH 110 User Manual
Page 42

Instruction Manual
CyberScan pH 11 / 110
38
9.3
P2.0: Viewing Previous Calibration Data
This mode lets you recall previous calibration data,
which helps you know when to re-calibrate your meter.
This is a “view only” mode.
From measurement mode:
1.
Press the SETUP key to enter Set up mode.
2.
Press the MI/Ÿ or MR/ź keys to scroll through
subgroups until you view parameter P2.0.
3. Press the HOLD/ENTER key repeatedly to
view previous calibration data. See Figure 34.
4. When you have scrolled through all calibration
data, you will automatically return to the
subgroup menu. Press CAL/MEAS key to
return to measurement mode.
NOTES:
If there is no previous calibration data at a particular point, the
primary display will show “ ----“.
SETUP
pH
cal
p 2.0
SETUP
pH
---
p 2.1
SETUP
SETUP
pH
pH
7.00
10.01
p 2.3
p 2.4
ENTER
HOLD
ENTER
HOLD
ENTER
HOLD
Figure 34: P2.0 - View
previous calibration data
http://www.novatech-usa.com/Products/Laboratory-Equipment-Supply-Products Tel: (281) 359-8538 Toll Free:(866) 433-6682