Nova-Tech PGL Series - Manual (Page 27)

9.2 STANDARD FORMAT 9.2 STANDARD FORMAT
The balance will print the following data as the standard form. The standard form
cannot be changed. The format of the custom forms #1 and #2 will be the same as
the standard form until modified by the user. The balance will print the following data as the standard form. The standard form
cannot be changed. The format of the custom forms #1 and #2 will be the same as
the standard form until modified by the user.
Line 1 Line 1 Date Date
© Adam Equipment Company 2008
Line 2 Time
Line 3 Blank line
Line 4 ID number
Line 5 Blank line
Line 6 Result
Line 7 Blank line
Line 8 Blank line
This will result in a printout that looks like:
Date: 23/09/04
Time: 15:45
ID No: 123456
NOTE:
The format of the results line will change depending on the mode in which the
balance is operating, e.g.
Normal weighing, Check weighing: “123.456 g”
Parts counting: “1234 pcs”
Percent weighing: “12.345 %”
9.3 INPUT COMMANDS USING REMOTE KEYS
The balance can be controlled with the following commands sent using remote keys
such as from a PC. The commands must be sent in upper case letters, i.e. “KT” not
“kt”. Press the Enter key of the PC after each command (the action of Carriage
Return is denoted as as shown below).
27 | P a g e © Adam Equipment Company 2008