Nova-Tech PGL Series - Manual (Page 14)

6.4 WEIGHING UNITS
You can select alternative weighing units to display the weight by pressing the [Unit]
key. The common weighing units are:
Unit Symbol Conversion Factor 1g = Conversion Factor 1 unit = grams
Grams g 1 1.0
Kilograms kg 0.001 1000
Carat ct 5 0.2
Ounces oz 0.035273962 28.349523
Pounds lb 0.0022046 453.5924
Troy ounces ozt 0.032150747 31.103476
Grains GN 15.43236 0.0647989
Pennyweights dwt 0.643014865 1.555174
Newtons N 0.00980665 101.921623
Custom Custom As specified As specified
If “CUSTOM” unit is selected, the balance will prompt for entering a multiplier by
displaying “MULTIPLIER X,XXX”, where “X,XXX” is the last stored value. Any value
ranging from 0.001 to 9.999 may be entered, by which the weight in grams will be
multiplied before being displayed. If a multiplier of greater than 1.000 is entered,
the number of decimal places displayed will be reduced by one. This multiplier value
will be saved for the next use till it is changed by the user.
It is possible to set the balance to display only grams. Grams will always be one of
the units enabled, by default.
The balance displays the alternate weighing units with as much precision as possible.
For example, the 4000g x 0.1g balance could weigh up to:
Unit Maximum d =
Grams g 4000.0 0.1
Kilograms kg 4.0000 0.0001
Carat ct 20000.0 0.5
Ounces oz 141.100 0.005
Pounds lb 8.8180 0.0005
Troy ounces ozt 128.605 0.005
Grains GN 61730 2
Pennyweights dwt 2572.1 0.1
Newtons N 39.226 0.001
14 | P a g e © Adam Equipment Company 2008