Nova-Tech IHS 2a - Manual (Page 7)

3.4 LOCATING AND PROTECTING YOUR BALANCE
In order to keep your balance functioning at its best we suggest that you do the
following:
Avoid extremes of temperature. Do not place in
direct sunlight or near air conditioning vents.
Make sure the balance is located on a strong table
and free from vibration.
Avoid unstable power sources. Do not use near large
users of electricity such as welding equipment or
large motors. Do not let the balance battery go flat –
if you are not using it for a long time you should
charge the battery up periodically to make sure the
battery does not lose its charge.
Keep free from vibration. Do not place near heavy or
vibrating machinery.
Avoid high humidity that might cause condensation.
Keep away from direct contact with water. Do not
spray or immerse the balance in water.
Do not place near open windows, air‐conditioning
vents or fans that may cause a draft and unstable
readings.
Keep the balance clean. Do not stack material on the
balance / balance pan when it is not in use. The
Highland has a stacking feature for stacking more
than one unit on top of each other which does not
apply weight to the pan. For more details on this see
the section on storing.
7 | P a g e © Adam Equipment Company 2008