Nova-Tech IHS 2a - Manual (Page 24)

9.0 SPECIFICATIONS
9.1 TECHNICAL SPECIFICATIONS
HCB123 HCB153 HCB302 HCB602 HCB602H HCB1002 HCB1502 HCB3001
Maximum Capacity 120g 150g 300g 600g 600g 1000g 1500g 3000g
Readability 0.001g 0.005g 0.01g 0.02g 0.01g 0.01 g 0.05g 0.1g
Repeatability(s.d.) 0.002g 0.005g 0.01g 0.02g 0.01g 0.01 g 0.05g 0.1g
Linearity ± 0.04g 0.01g 0.02g 0.04g 0.02g 0.02 g 0.1g 0.2g
Pan 120mm / 4.7” ø
Draft shield Included as standard
Units of Measure g / ct /OZ / d / GN / OZt / dWt / MM /
TL.T / TL.C / TL.t /t / N /g2.
g / ct / Lb / OZ / d / GN / OZt / dWt / MM
/ TL.T / TL.C / TL.t /t / N /g2.
9.2 COMMON SPECIFICATIONS
Interface USB and RS‐232, bi‐directional
Stabilization Time 2 Seconds typical
Operating Temperature 0°C to 40°C / 32°F to 104°F
Power supply (external) 12VDC 800 mA
Calibration HandiCal Internal calibration or external calibration ‐ User selectable
Display 18mm high 6 digits LCD
With auto backlight and loading bar graph
Scale Housing ABS Plastic with Stainless Steel Pan
Overall Dimensions (wxdxh) 170 x 245 x 80mm / 6.7” x 9.6” X 3.1”
Net Weight
1.5 kg / 3.3 lb
9.3 RS‐232 / USB SPECIFICATIONS
Either the RS‐232 or USB interface can be used at one time. You cannot use both
interfaces at the same time. See parameters 6.3 Setting The Printing Parameters /
Accumulation section for full information on settings
The standard Interface parameters are: Connection details are:
Generally a Null model cable is required
for connection to a computer or printers.
RS‐232 output of weighing data
ASCII code
4800 Baud
8 data bits
No Parity Connector: 9 pin d‐subminiature socket
Pin 3 Output
Pin 2 Input
Pin 5 Signal Ground
24 | P a g e © Adam Equipment Company 2008