Nova-Tech IHS 2a User Manual

Page 25

Data Format for normal weighing operations, parts counting or recalling of totals
from memory will all be different.

Normal Output:

G S _ X X X

X X u u u

GS    123.45g     GS for Gross Weight, NT for Net Weight and u for unit of weight
No.               1    This number increments every time a new value is stored in memory
Total  123.45g    The total value stored in memory
                     Includes 2 line feeds

Input command format:

The scale can be controlled with the following commands. The commands must be
sent in upper case letters, i.e. “T” not “t”.

Tares the scale to display the net weight. This is the same as pressing [Tare]
key.

Sets the zero point for all subsequent weighing. Display shows zero.

T5.345

Would be same as entering a preset tare value of 5.345 from keypad

Prints the results to a PC or printer using the optional RS‐232 interface. It also
adds the value to the accumulation memory if the accumulation function is
not set to automatic.

25 |

P a g e

This manual is related to the following products:

HCB Series