0 introduction, 0 set up, 1 unpacking and setting up your balance – Nova-Tech IHS 2a User Manual

Page 4: Introduction, Set up, Unpacking and setting up your balance, 0 set

2.0 INTRODUCTION

Thank you for purchasing your new Highland

portable balance, Every Highland

balance has all the features you really need: AC adapter and internal rechargeable
battery, HandiCal

calibration, backlit display, and ShockProtect

with overload

indicator. With RS‐232 and USB interface for communication with printers and
computers, splash‐proof keypad, and sturdy plastic construction, the Highland

series will be a balance you can rely upon. We hope that you enjoy using your new
balance.

3.0 SET

3.1

UNPACKING

AND

SETTING

YOUR

BALANCE

1) Remove the balance, draft shield, top pan, AC adapter and pan support from

the packaging

2) Remove all the transit protection packaging from the calibration lever

( protects the internal calibration assembly during transit)

3) Remove the shipping protection screw and transit disc from the top of the

balance and place the plastic top pan support on the balance. Do not use
excessive force when removing and installing the screw.

4) Put the Stainless steel pan on top of the pan support

5) Place the draft shield on top of the balance, the location notches in the breeze

shield should align with the cut outs on the balance. For optimum
performance the balance should be used with the draft shield (if provided).

USB interface on side

4 |

P a g e

This manual is related to the following products:

HCB Series