Nova-Tech CBK Series - Manual (Page 28)

© Adam Equipment Company 2007
26
13.2 RS-232 PARAMETERS
• Shortcut to enter this group is to press and hold the [Print] key for 4
seconds. The display will go directly to “C1 on”.
• Press [Func] to view the list of parameters.
• Press [Tare] to enter a parameter. Press [Func] to view the options for
the parameter settings.
• Press [Tare] to confirm the change and then advance to the next
parameter by pressing the [Func] key.
• Press [Zero] to return to the group “FUnC 2”. If you press [Zero] again,
the scale will exit the User Parameter section and return to weighing.
This group of parameters can be set by the user for setting the language,
baud rate, printing mode, etc. The user can also set a Scale ID number and
a User ID number.
Parameter Description Options Default Values
or setting
C1 on Enable or disable the
RS-232 interface Prt on
Prt oFF Prt on
C2 bd Baud Rate 600
1200
2400
4800
9600
19200
9600
C3 PrM Printing Mode- Manual,
Continuous or
Automatic mAn
,
Cont
AUto
mAn
C4 Aon Enable or disable the
Accumulation AC on
AC oFF
AC on
C5 Ln Select Language EnGLi
(English)
FrEnCH
(French)
GErmAn
(German)
SPAn
(Spanish)
EnGLi
C6 UId Set User ID To be entered manually 000000
C7 Sid Set Scale ID To be entered manually 000000