Nova-Tech CBK Series User Manual

Page 21

© Adam Equipment Company 2007

• To view the total in memory press the [Print] key when the scale

is at zero. The display will show the total number of accumulation
"ACC xx" and the total weight before returning to zero.

• To print the total, press [Print] to recall and then immediately

press

[Print] the second time to print the results.

• To erase the memory, press [Print] to view the total and then

immediately press

[CE] to clear the memory.

10.8.2

Automatic Accumulation

When the scale has been set to Automatic Accumulation the value is stored
in memory automatically.

• Place a weight on the scale. The beeper will sound when the

scale is stable indicating the value is accepted. Remove the
weight.

• The display will show "ACC 1" and then the total in the memory

before it returns to zero. Adding a 2

weight will repeat the

process.

• While the weight is on the scale, press the [Print] key to view the

values- first the accumulation number "ACC x" and then the total
will be shown.

NOTE:

1. The scale will not show the value when a weight is removed.

2. In all cases the scale must return to zero or a negative number,

before another sample can be added to the memory.

3. More products can be added and

[Print] be pressed again for

up to 99 entries until the capacity of display is exceeded.