Nova-Tech CBK Series User Manual

Page 15

© Adam Equipment Company 2007

• To count a different sample quantity, press the [Count] key. The

display will show the last used sample size. Either use this sample
size with a different part or enter a new sample size as above.

• To return to weighing, press [Unit] when “0 pcs” is displayed.

10.5 CHECK-WEIGHING

Check-weighing is a procedure to display an indicator or sound an
alarm when the weight on the scale meets or exceeds the values stored
in the memory. The memory holds values for a high limit and a low
limit. Either or both the limits can be set by the user.

NOTE:

1. The alarm and the LED bargraph can each be set to OFF (See

section 13.1). The LCD display will indicate whenever the weight is
within or exceeds the limits by showing ‘

OK’, ‘HI’ or ‘LO’.

2. The limits can be locked by the manager. A Limit Password must be

used to change the limits or recall other limits from memory.

Mass on the balance is above the high limit

Mass is between the limits

Mass is below the low limit