Nova-Tech CBK Series - Manual (Page 11)

© Adam Equipment Company 2007
9
7.0 BATTERY
• The scales can be operated from the battery, if desired. The
battery life is approximately 90 hours.
• When the battery needs charging a symbol on the display will turn
on. The battery should be charged when the symbol is on. The
scale will still operate for about 10 hours after which it will
automatically switch off to protect the battery.
• To charge the battery, simply plug into the mains power supply.
The scale does not need to be turned on.
• The battery should be charged for 12 hours for full capacity.
• To the left of the display is a LED to indicate the status of battery
charging. When the scale is plugged into the mains power the
internal battery will be charged. If the LED is green the battery is
being charged. If it is red it is nearly discharged and yellow
indicates the battery is increasing the charge level. Continue to
charge overnight for a complete re-charge.
8.0 BACKLIGHT
The backlight for the LCD can be set by the user to always off, always on or
automatic (on only when the scale is in use or a key is pressed). See setting
of the parameter “S2 bL” in section 13.3.
9.0 AUTO POWER OFF
The auto power off can be set by the user to disable the feature or to a pre-
set time interval. See setting of the parameter “S3 AoF “ in section 13.3.