Nitek MNG6448 - Manual (Page 2)

2
Copyright
Nitek reserves the right to change or amend this manual at it sole digression. You may not duplicate the content of
this manual without the written permission of Nitek. This manual contains no implicit or implied warranties as to the
usability of the product for your particular application.
About the manual
The purpose of this manual is to provide installation instructions for install the wireless Mesh unit. This manual is
including proposed actions and method and helping the customer to solve the unpredictable problem. Each instal-
lation is different and should be performed by a qualified Technician.
The following graphical conventions are used in this Manual.
Notice: Indicates an important point
Warning Indicates a warning or caution
System Requirement
Two PCs with RJ-45 connector NIC supporting the transfer rate of 10/100Mbps data.
The IP address of NIC should be the same subnet with the AP, the default IP address of AP is
192.168.1.1.
Microsoft Internet Explorer 6 updated with Service Pack 1 or the newer patch Q323308.