Nitek VB31AT - Manual

INSTALLATION GUIDE
NITEK
®
De Schans 19-21 2a
8231 KA Lelystad
Tel: +31(0)320-2300005
Fax: +31(0)320-282186
E-mail: [email protected]
WWW.NITEK.NL
USA
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
E-mail: [email protected]
WWW.NITEK.NET
EUROPE
Video Balun Combiner for Twisted Pair
VB31AT
Video Balun Combiner for twisted pair up to 750 feet (225 meters) in conventional UTP
applications, 100 meters in TIA/EIA 568 applications.
The VB31AT is a unique transmission device which provides an economical means of
sending video and camera power over a standard Category cables. Video is sent over
one pair and camera power is sent over the two of the remaining pairs. A mini-coax pig-
tail with male BNC is used on the VB31AT. A pair of wires are provided for power con-
nection. Connections to the Category cable are made via an RJ45 connector.
The VB31AT Video Balun provides the same high immunity to noise and interference as
all of the Nitek baluns. This simplified wiring scheme provides a convenient method of
powering the camera, allowing for quicker and easier installations. The RJ45 modular
jack uses standard 568B wiring so spare network cables can be used.
Description