Detroit Radiant Products Company MP Series - Manual (Page 4)

WARNING
!
Placement of explosive objects, flammable objects, liquids and vapors close to
the heater may result in explosion, fire, property damage, serious injury or death .
Do not store or use explosive objects, liquids or vapor in the vicinity of the heater .
AVOID EQUIPMENT FAILURE
THIS 10 FT. TUBE IS THE
COMBUSTION CHAMBER.
THIS TUBE MUST BE THE FIRST TUBE
FOLLOWING THE BURNER CONTROL BOX.
! INSTALLER
The combustion chamber utilizes either 409
stainless, titanium alloy or aluminized steel -
depending on the model number of your heater.
Rotate the tube’s welded seam to bottom.
Consult the manual(s) for further details.
F/N: LLTB004 (orange)
(150,000 - 200,000 BTU/h models only)
Burner Control Box Component Label
(located inside the center compartment lid)
Rating
Plate
Controls Compartment
F/N: LLTB026 F/N : LLTB024L
Fan Compartment
16” Burner Tube Combustion Chamber F/N: LLTB025R
F/N: LL01 - Clearance Safety Tag
(Affix adjacent to heater’s thermostat)
MP-40-150N
Data on this label is for the model shown on this label. If your heater has been converted,
this information is not accurate. Please contact the factory for assistance.
BURNER COMPONENTS:
Serial #: 0112DETR21400 0001
Gas Valve:
Circuit Board:
Wire Harness:
N.O. Switch:
N.O. VL Orifice:
N.C. Switch:
N.C. VL Orifice:
Diff Switch:
Diff VL Orifice:
Igniter:
Burner:
16” Tube:
Ind. Lights: Diag. Light:
Term. Block:
Transformer:
Fan:
Alt. Fan:
Alt. Fan Usage:
Relay:
Filter:
24 Volt In:
120 Volt In:
Gas In:
Extra VL Orifice:
Production Code:
Version: Add-on:
Stock:
Internal Use Only: HEATER
TYPE: Electric:
Tag: Special 1:
Special 2: Gas:
Air:
C1
C1 C2 C3
None
N/A
MP-150
10.11
Valve Assy - Nat
Mod Controller
Mod Wiring Harness
None
None
None
None
IS22010051F5166
Grey (+ / -)
Norton
Mid
4” Gen.
Yellow - 24V
(Specify TP-#’s)
3240
3250
3254
N/A
N/A
1264A
50
201B
3380
328
1428
None
40 VA
Fasco Lg.
50Hz - 120V
When Specified
Picker x2
None
3 T-plug
6’ Blk. Cord
7/8” FC
None
N/A
826
3015
None
None
N/A
333
FC-36
X
X-X”
TP-204#
TP-3014# X
X-X”
LLWT0XX
None X
X-X”
X
X.X”
Orifice Type:
SA
MP
LE
®
DETROIT RADIANT PRODUCTS COMPANY 21400 HOOVER ROAD - WARREN, MI
RE-VERBER-RAY INFRA-RED RADIANT TUBE HEATER
FOR OUTDOOR USE AND INDOOR (Non-Residential) INSTALLATION ONLY.
Class IIIA Permanent Label
(586) 756-0950 - www.drp-co.com
Volts AC:
AMPS - Starting:
AMPS - Running:
Combustion Chamber:
120V - 60Hz
4.8
1.1
4” Black Coated Aluminized For stainless steel upgrades: The combustion tube is 409 Series stainless steel.
DESIGN COMPLIES WITH: ANSI Z83.20b-2004-GAS FIRED LOW INTENSITY INFRA-RED HTR.
Manifold Pressure:
Maximum Inlet Pressure:
Minimum Inlet Pressure:
3.5 in.
14 in.
5.0 in.
W.C.P.
W.C.P.
W.C.P.
Serial No.: 1011XXXXXXXXXX 0001
MODEL NO. MP-40-150N
Heater Type
Minimum Mounting Angle:
Maximum Mounting Angle:
C1
0
45
DEGREES
DEGREES
INPUT BTU/H 155,000 / 150,000 / 98,000 FOR USE WITH Natural Gas
SERVICE ACCESS PANEL IGNITER & FLAME SENSE COMPARTMENT
1. Disconnect gas & electricity. 2. Remove cover by lifting top cover upward and outward. CAUTION: HOT SURFACE. KEEP COVER IN PLACE. REMOVE FOR SERVICE ONLY.
MP
SERVICE ACCESS PANEL
IGNITER & FLAME SENSE COMPARTMENT
1. Turn off gas & electricity.
2. Remove cover by lifting top
cover upward and outward.
CAUTION: HOT SURFACE.
KEEP COVER IN PLACE. REMOVE FOR SERVICE ONLY.
SERVICE ACCESS PANEL
SERVICE ACCESS PANEL
Radiant Tube(s)
®
DETROIT RADIANT PRODUCTS COMPANY
21400 HOOVER ROAD - WARREN, MI
RE-VERBER-RAY INFRA-RED RADIANT TUBE HEATER
FOR OUTDOOR USE AND INDOOR (Non-Residential) INSTALLATION ONLY.
Class IIIA Permanent Label
(586) 756-0950 - www.drp-co.com
Volts AC:
AMPS - Starting:
AMPS - Running:
Combustion Chamber:
120V - 60Hz
4.8
1.1
4” BC Titanium
DESIGN COMPLIES WITH:
ANSI Z83.20b-2004-GAS FIRED LOW INTENSITY INFRA-RED HTR.
Manifold Pressure:
Maximum Inlet Pressure:
Minimum Inlet Pressure:
4.1 in.
14.0 in.
5.0 in.
W.C.P.
W.C.P.
W.C.P.
Serial No.: 1011DETR021400 0001
MODEL NO.
MP-40-150N
Heater Type
Version:
Minimum Mounting Angle:
Maximum Mounting Angle:
C1
10/11
0
45
Degrees
Degrees
INPUT BTU/H
155,000 / 97,000
FOR USE WITH
Natural Gas
For stainless steel upgrades: The combustion
tube is 409 Series stainless steel.
SA
MP
LE
4
MP Series 1.0 Safety • Safety Labels and Locations • Clearance to Combustibles
Clearance to combustibles is defined as the minimum distance that must exist between the tube surface,
or reflector, and any combustible items (see Figure 1 .1) . It also pertains to the distance that must be
maintained from moving objects around the tube heater .
Clearance to Combustibles