Detroit Radiant Products Company MP Series - Manual (Page 3)

NEUTRAL
EARTH
HOT
- 120V HEATER INPUT -
120V
1.0 Safety
NEUTRAL EARTH
HOT
- 120V HEATER INPUT -
120V
F/N: LLAC
Air Metering Orifi ce
Air Metering Orifice
DO NOT REMOVE
TP-114
TP-3014
3"
SAMPLE
Air Metering Orifice Air Metering Orifice
DO NOT REMOVE DO NOT REMOVE
TP-114 TP-114
TP-3014 TP-3014
SAMPLE
SER
VICE
ACCESS P
ANE
L
CONTROLS & GAS
VA LVE COMP
ARTMENT
1. Disconnect gas & electricit
y.
2. Remove four (4) thumbscrews
.
3. Remove top cove
r.
4. Swing hinged panel downward. KEEP
COVER IN PLACE. REMOVE FOR SER
VICE ONL
Y.
SER VICE
ACCESS P
ANE
L
IGNITER & FLAME SENSE COMP
ARTMEN
T
1. Disconnect gas & electricit
y.
2. Remove cover by lifting top cover upward and outward
.
CAUTION
: HOT SURF
ACE.
KEEP COVER IN PLACE. REMOVE FOR SER
VICE ON LY .
SER
VICE
ACCESS P
ANE
L
F AN COMP
ARTMENT
1. Disconnect gas & electricit
y.
2. Remove top cover (2 thumbscrews). 3. Remove tsix (6) 1/4” screws. 4. Lift and remove panel. KEEP
COVER IN PLACE. REMOVE FOR SE
RV
ICE ONL
Y.
Safety Labels and Their Locations
Back Panel
Top Panel
Bottom Panel
F/N: LLTB018 (Natural Gas)
F/N: LLTB019 (LP Gas)
F/N: LLTCL001L2/LLTCL002C2/LLTCL002R
Safety & Clearance Labels
F/N: LLLOGO1 Re-Verber-Ray Logo Label
Product safety signs or labels should be replaced by the product user when they no longer are legible .
Contact either your local distributor or the product manufacturer for obtaining replacement signs or labels .
F/N: LLV3EP1
F/N: LLV3EP18
F/N: LLV3EP6
(Operational Indicator Lights)
F/N: LLLOGO19
MP Series
Logo Label
3
MP Series 1.0 Safety • Safety Labels and Locations
Read and understand all safety information and warnings in this Insert Manual and the Tube
Heater General Manual before installation, operation and maintenance of the radiant tube
heater system .