Multichannel Systems USB-MEA256-System Manual - Manual (Page 35)

Appendix
29
Data converter and USB interface:
Sampling frequency up to 40 kHz
Maximal data rate 20.5 MB/s
Data resolution 16 Bit
USB Version USB 2.0 High Speed
Heating element and temperature
sensor:
Heating element impedance 20

Temperature sensor type PT 100 with 4 wire connection
Rear Panel interface and connectors:
1 16 bit digital in / out 68-pin MCS standard connectors,
MCS high grade cable
1 Digital out D0 OUT Lemo connector (EPL.00.250 NTN)
1 Digital in D0 IN Lemo connector (EPL.00.250 NTN)
1 Audio output Stereo jack 3.5 mm
4 Additional analog inputs Lemo connector (EPL.00.250 NTN)
USB USB 2.0 High Speed cable (type A – Mini B)
Ground Common jack 4 mm, banana plug
Power supply Barrel connector 0.7 x 2.35 mm
Power supply unit (MPU 30):
Input voltage 90 – 264 VAC @ 47 - 63 Hz
Output voltage 11 – 13 V
Max. Power 30 W
Software:
MC_Rack program Version 3.7.0 and higher
Operating system Windows 7, XP or Vista with NTFS
English and German versions are supported
MC_DataTool program Version 2.4.5 and higher
Data export ASCII (*.txt), binary file (*.raw) format
Warning: The device may only be used together with Microelectrode Arrays from Multi
Channel Systems MCS GmbH, and only for the specified purpose. Damage of the device and
even fatal injuries can result from improper use. Do not open the data acquisition box and
do not change hardware configuration as it could lead to improper behavior of the system.