Multichannel Systems USB-MEA256-System Manual - Manual (Page 19)

USB-MEA256-System
13
4.8 Setting Up the Amplifier
Open the lid of the amplifier.
Place the 256MEA test model probe inside. Replace the lid and close it carefully.
First Functional Tests
Each MEA amplifier has been thoroughly tested at the factory site before delivery. However,
you may want to perform some tests yourself before you begin your experiment to exclude
any damage that might have occurred during transportation, or to fulfill your own guidelines,
for instance. Some of the tests will also help you to get to know the basic functions of the hard-
and software, like a short tutorial. It will take only a few minutes time and can save you time and
trouble in the long run. Multi Channel Systems recommends running these tests after the setup of
your system before you start your real experiments.