MP Pumps PETROLEUM 40 - Manual

PETROLEUM 40
4" x 4" Self Priming Centrifugal Pump
Petroleum 40 self-priming centrifugal pumps are capable of creating
vacuum sufficient to lift liquids from heights up to 25 feet above the source.
To handle many different fuels, the Petroleum 40 is available in three
distinct models: PO, PG and PE 40.
The Petrolmaxx 40 units are offered with pedestal mounted bearing units
for long coupling. Standard features include SS drive sleeve, SS fasteners,
renewable wear plate, and a semi-open dynamically balanced impeller.
The Petroleum 40 Pump is available in three distinct models: PG, PO and
PE
Model PG Pumps - Compatible For Gasoline, Kerosene, Avgas & Jet Fuel
Model PO Pumps - Compatible For BioDiesel, Fuel Oil & Diesel
Model PE Pumps - Compatible For Ethanol & E 85
SPECIFICATIONS:
Suction and Discharge . . 4" x 4" NPT
Flow . . . . . . . . . . . . . . . Up to 750 GPM
Head Feet . . . . . . . . . . . Up to 225'
Impeller . . . . . . . . . . . . PE 40 - semi open cast iron, 316 SS (optional)
PG 40 - semi-open cast iron, aluminum (optional)
PO 40 - semi-open cast iron
Motor . . . . . . . . . . . . . . Up to 50 HP
Drive Options . . . . . . . . Pedestal
Seal . . . . . . . . . . . . . . . PE 40 - carbon / silicon carbide / Viton
PG 40 - carbon / silicon carbide / Viton
PO 40 - Type 21 carbon / Ni-Resist / Viton
Application:
Agricultural •
Industrial •
Marine •
OEM •
Compatible For:
PE 40 - ethanol, E 85 •
PG 40 - gasoline, avgas, kerosene, jet A/8 •
PO 40 - biodiesel, fuel oil, diesel •
Features:
Non-spark clamp (on some models) •
Renewable wear plate •
Stainless steel drive sleeve •
Stainless steel fasteners •
Up to a 25' suction lift •
Mounting Options:
PE 40 - explosion proof, class 1, group D •
PG 40 - expolsion proof, class 1, group D •
PO 40 - TEFC •