MP Pumps FLOMAX 5 HYDRAULIC - Manual

FLOMAX
®
5 HYDRAULIC
1-1/2" x 1-1/2" Self Priming Centrifugal Pump
FLOMAX
®
5 hydraulic self-priming centrifugal pumps are capable of
creating vacuum sufficient to lift liquids from heights up to 25 feet above the
source. Once primed, the pump's built in flapper valve will maintain a full
column of liquid in the suction line.
A FLOMAX
®
5 hydraulic pump is available in .22, .37 or .45 cubic inch
displacement gerotor motors. They are capable of hydraulic flows ranging
from 4 GPM to 11 GPM and hysrdulic pressures ranging from 700 PSI to
1950 PSI.
Standard features include stainless steel drive sleeve, stainless
steel fasteners, renewable wear plate, and a semi-open dynamically
balanced impeller. Options include double grease lubricated
seals, stainless steel impeller and seals for all types of abrasive and/or
corrosive services.
The FLOMAX
®
series of pumps are commonly used in Industrial,
Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire
Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and
Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks,
Bulk Transfer Pumps and much more.
SPECIFICATIONS:
PSI . . . . . . . . . . . . . . . . Up to 100
Suction and Discharge . . 1.5" x 1.5" NPT ports
Materials of Construction Aluminum
Bronze
Cast iron
Flow . . . . . . . . . . . . . . . Up to 175 GPM
Head Feet . . . . . . . . . . . Up to 230'
Impeller . . . . . . . . . . . . 5.0" semi-open
Max Solid Size . . . . . . . .56" diameter
Drive Options . . . . . . . . Hydraulic motor .22 cu. in.
Hydraulic motor .37 cu. in.
Hydraulic motor .45 cu. in.
Seal . . . . . . . . . . . . . . . Special seal material combinations available
(consult factory)
Standard carbon / ceramic / Viton
Application:
Agricultural •
Industrial •
Marine •
Features:
Renewable wear plate •
Stainless steel drive sleeve •
Stainless steel fasteners •
Up to a 25' suction lift •
Hydraulic Fluid Flow:
Up to 11 GPM •
Hydraulic Motor:
Gerotor •
Hydraulic System Pressure:
Up to 2550 psi •