MP Pumps CHEMFLO 2 HYDRAULIC User Manual
Chemflo, 2 hydraulic, 1/2" x 1" end suction centrifugal pump
CHEMFLO
®
2 HYDRAULIC
1-1/2" x 1" End Suction Centrifugal Pump
Made with high quality investment cast 316 stainless steel components, the
ChemFlo
®
series of pumps are designed to be applied in a wide range of
pumping applications where stainless steel is required.
The ChemFlo
®
2 hydraulic pumps utilize a semi-open impeller design to
allow for passage of larger solid sizes than similar sized enclosed
impellers. Several mechanical seal options are available in addition to the
standard type 2100 carbon / ceramic / Viton mechanical seal.
ChemFlo
®
2 hydraulic pumps are offered with .22 or .37 cubic inch
displacement gerotor motors for hydraulic flows up to 10 GPM and a
maximum pressure of 2600 PSI.
Further expanding the versatility of the ChemFlo
®
series is the CFB 2
pump, a ChemFlo
®
2 in NiBrAl material. All wetted parts are produced in
CA 958 nickel aluminum bronze including the drive sleeve to maximize
corrosion protection in seawater applications.
SPECIFICATIONS:
PSI . . . . . . . . . . . . . . . . Up to 125
Suction and Discharge . . 1-1/2" x 1" NPT
Materials of Construction 316 stainless steel
CFB (nickel aluminum bronze)
Flow . . . . . . . . . . . . . . . Up to 160 GPM
Head Feet . . . . . . . . . . . Up to 280'
Impeller
. . . . . . . . . . . . 5.25" semi-open, cast 316 stainless steel
Drive Options . . . . . . . . Hydraulic motor .22 cu. in.
Hydraulic motor .37 cu. in.
Seal
. . . . . . . . . . . . . . . Special seal material combinations available
(consult factory)
Standard carbon / ceramic / Viton
Application:
Agricultural
•
Commercial
•
Industrial
•
Marine
•
OEM
•
Hydraulic Fluid Flow:
Up to 10 GPM
•
Hydraulic Motor:
Gerotor
•
Hydraulic System Pressure:
Up to 2600 PSI
•
Options:
Hydraulic motors with flow control
•