MP Pumps CHEMFLO 4 HYDRAULIC - Manual

CHEMFLO
®
4 HYDRAULIC
2" x 1-1/2" End Suction Centrifugal Pump
Made with high quality investment cast 316 stainless steel components,
the ChemFlo
®
series of pumps are designed to be applied in a wide range
of pumping applications where stainless steel is required.
The ChemFlo 4 hydraulic pumps utilize a semi-open impeller design to
allow for passage of larger solid sizes than similar sized enclosed
impellers. Several seal options are available in additon to the standard
type 2100 carbon / ceramic / Viton mechanical seal.
ChemFlo
®
4 hydraulic pumps are offered with .22 or .37 cubic inch
displacement gerotor motors for hydraulic flows up to 10 GPM and a
maximum pressure of 2500 PSI.
Further expanding the versatility of the ChemFlo
®
series is the CFB 4
pump, a ChemFlo
®
4 in NiBrAl material. All wetted parts are produced in
CA 958 nickel aluminum bronze including the drive sleeve to maximize
corrosion protection in seawater applications.
SPECIFICATIONS:
Suction and Discharge . . 2" x 1-1/2" NPT
Materials of Construction 316 stainless steel
CFB (nickel aluminum bronze)
Flow . . . . . . . . . . . . . . . Up to 240 GPM
Head Feet . . . . . . . . . . . Up to 100'
Impeller . . . . . . . . . . . . 4.5" semi-open, cast 316 SS
Drive Options . . . . . . . . Hydraulic motor .22 cu. in.
Hydraulic motor .37 cu. in.
Seal . . . . . . . . . . . . . . . Special seal material combinations available
(consult factory)
Standard carbon / ceramic / Viton
Application:
Agricultural •
Commercial •
Industrial •
Marine •
OEM •
Hydraulic Fluid Flow:
Up to 10 GPM •
Hydraulic Motor:
Gerotor •
Hydraulic System Pressure:
Up to 2600 PSI •
Options:
Hydraulic motors with flow control •