Mobi Technologies 70008 Recam Remote Monitoring - Manual (Page 5)

- 5 -
Installation & Quick Start
Before you begin the installation process, exit other open programs, and save your work. For updated information
about ReCam, visit www.getmobi.com/recam.php
Installation notes
Before you install ReCam, review the following notes:
To install ReCam in Windows NT, XP, or 2000 Professional, you must log on with Administrator or Power User
privileges.
If an old version of ReCam software is already installed on your computer, you can install the newer version
without uninstalling the old one.
If your computer is running virus protection software, disable it before installing ReCam software, and turn it back
on after installation.
By default, ReCam software will be installed in the C:\Program Files\ReCam folder. During installation, you can
choose another drive or folder for the install.
Installing ReCam software
You must use the installation program to install ReCam software —you can’t install ReCam software by dragging
files to your hard disk.
To install ReCam on your hard disk:
1. Insert ReCam CD into your CD or DVD drive
2. Follow the on-screen instruction to complete installation
Quick Start (IP Camera setup)
1. Select File on the Menu Bar
2. Select New Camera
3. Select Network IP Camera from the video device list
4. Choose your IP camera from the Camera Model drop down list (In most cases even if your specific camera
brand or model is not listed you can access the camera via ReCam by just entering its IP address)
5. Enter the IP address and Port for your camera
6. Enter the User Id and Password if applicable
7. Click Connect to Camera
8. Click Ok
Notes:
By default cameras added will have the “Enable Live Recording” feature in the “Recording” tab activated
for continuous recording.
All camera settings or profiles can be saved as sessions that can be reloaded automatically.
Certain models may not be compatible with ReCam software. Please check www.getmobi.com/recam.php for a
list of incompatible IP cameras.
Quick Start (USB Camera setup)
Note: Before you create a new local camera, make sure its driver is installed on your computer. Consult your
Camera’s user manual for proper installation.
1. Select File on the Menu Bar
2. Select New Camera
3. Select Local Camera the video device list