MaxPower Corp OceanAire Portable - Manual (Page 9)

OPTIONAL FEATURES
TREATED EVAPORATOR AND CONDENSER COILS
When airborne contaminants are a problem for air conditioning applications, acrylic and heresite coated
coils are recommended to guard against pitting and corrosion.
CONDENSER DUCT
Condenser duct may be used to direct and dispose of
the warm condenser air out of the space. 12 inch round
condenser air discharge duct is used on all models
except the 5 ton unit. 16 inch duct is used on the 5 ton
(PAC6012).
CEILING PANEL/DUCT KIT ASSEMBLY
An optional CK-12 (All Models except 5-ton) ceiling
panel kit consists of 8 feet of flexible duct, a 2' X 2' lay
in ceiling panel and a 12 inch duct flange that attaches
to the condenser air discharge opening on the top of the
unit. The optional CK-16 consists of similar
components for 16 inch duct. Installation can be
completed by following these simple steps:
1) Place the 2' X 2' lay-in ceiling panel in the false
ceiling directly above the unit.
2) Attach the duct flange to the unit with three screws
provided.
Drop ceiling spaces should be vented or large enough
to handle the warm condenser air. Check local codes to
assure compliance.
If longer runs of duct are required, table below lists
maximum duct run with no 90° elbows. For every 90° elbow, subtract 6 feet from the run.
7
airbossmanpg7
2 x 2 ceiling panel
12 inch flex
duct
Optional
12 inch duct
flange
Optional nozzles
Model
Ceiling Kit
Round Flexible
Duct Size Diameter
Length
Fits
PAC
10
Fits
PAC
12
Fits
PAC
18
Fits
PAC
24
Fits
PAC
36
Fits
PAC
60
CK-12
Size/Fits
12 inch
8 feet
Yes Yes Yes Yes Yes No
CK-16
Size/Fits
16 Inch
8 feet
No No No No No Yes
Maximum Approx
Equivalent Feet
(ESP)
25
(.20)
25
(.20)
50
(.25)
50
(.25)
50
(.25)
100
(.50)