Magnum Venus Plastech CB-8000-xxx Resin Monitor - Manual (Page 9)

INSTALLATION AND OPERATIONS MANUAL CB-8000-XXX
MAGNUM VENUS PLASTECH REV 1.05
APRIL 2013 PAGE 9
CHAPTER 2-Introduction
The CB-8000-xxx Resin Monitor is designed to help operators achieve resin weight targets. The unit has triple
displays with external resets on the two large LED readouts.

The unit utilizes an electro-mechanical sensor (either magnetic or proximity) to keep track of fractional
pump strokes.

Display #1 is used to track certain areas of the part being fabricated, coupled with a remote reset the
operator can quickly zero the counter at any time.

Display #2 is used to total the resin usage for the entire part. This can be reset locally at the panel via
pushbutton. Optionally this can also be configured for a glass counter as an option

Display #3 (inside panel) is used to keep track of total resin usage for a period of time. This can be reset
inside the panel and can be locked out except for authorized personnel.
o Note: If the glass counter option is enabled, this display only keeps track of resin total.

The CB-8000-xxx comes standard with a 50 foot remote reset and 25 foot sensor line. Extra lengths are
available on request.